Comfort-Aire : The Source for Residential and Commercial Heating and Cooling Equipment.


Related Products:

GeoLogix Two Stage Package Heat Pump

Attention: open in a new window. PDF | Print | E-mail

GeoLogix™ Plus

HT Series: Two Stages for Exceptional Efficiency

Our two stage models are among the most efficient heating and cooling systems available today, with EERs as high as 29.1 and COPS as high as 4.8.

 

Two stage models are available in the following configurations:
HTV=Vertical upflow design
HTD=Vertical downflow/counterflow design
HTH=Horizontal design

The two-stage design allows the unit to run at 67% capacity most the time to maintain a consistent temperature and humidity level. When there's a demand for greater heating/cooling (such as during temperature extremes), the unit automatically and instantly changes to 100% capacity. This part load/full load capacity significantly lowers annual operating costs while increasing comfort.

In addition to the full load/part load operation, a variable speed blower motor adds to comfort and efficiency with a multitude of operational modes. The blower motor automatically adapts to all applications.

The two stage heat pump system uses environmentally friendly R-410A.

A hot water generator with built-in pump and CuNi coil are standard features that add value and efficiency.

The HT Series is available in 2 to 6 ton capacities.

NOTE: Not all models qualify for Energy Star based on installation; consult www.energystar.gov for details.

Features

Quiet Operation—Double isolation compressor mounting system and vibration isolation springs; insulated divider and separate compressor and air handler compartments

Extended Operating Range—20 degrees to 120 degrees F makes unit suitable for virtually all applications and climates

Two Stage Compressor—Copeland multi-stage scroll compressor provides comfort at higher efficiencies than single stage models

Microprocessor Controls—Includes performance monitoring system to signal a potential problem before a lockout occurs

Durable Cabinet—G90 galvanized steel has a tough epoxy finish; drain pan is stainless steel; air coils are coated

Easy Installation & Service—Service valves are included; three panels are easily removed, making it simple to access components

Accessories

A complete line of accessories is available including flow controls, valves, fusion kits, thermostats, hoses and more, CLICK HERE. See price sheet for complete listing of accessories.

 

 

Last Updated (Thursday, 08 December 2011 15:36)

 


Look for the Leaf: R-410A is called an environmentally-friendly refrigerant because it does not contribute to the depletion of the earth's vital ozone layer, which provides a protective barrier against the sun's harmful UV rays. Soon all refrigerants used around the world will be replaced by non-ozone depleting refrigerants such as R-410A, which is already in use in many Comfort-Aire models. Look for equipment marked with the leaf, signifying that it's charged with R-410A.

 

HomeWhat's NewAbout UsContact UsDownloadsProduct RegistrationPoliciesWhere to BuyIndustry LinksConsumer ResourcesStart up certification. . . . . . . . . .
Site Map

©2012 All rights reserved.
Design by AEworks.com

Joomla Appliance - Powered by TurnKey Linux